[elbe-devel] Elbe initvm create not possible
Steih, Martin
Martin.Steih at lachmann-rink.de
Fri Jan 7 16:47:14 CET 2022
0.000000] Linux version 5.10.0-10-amd64 (debian-kernel at lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.84-1 (2021-)
[ 0.000000] Command line: root=/dev/vda1 debconf_priority=critical console=ttyS0,115200n1 DEBIAN_FRONTEND=text
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr f8b7001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 741577989 cycles
[ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000010] tsc: Detected 2793.530 MHz processor
[ 0.000581] last_pfn = 0x3ffdb max_arch_pfn = 0x400000000
[ 0.000617] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.008158] found SMP MP-table at [mem 0x000f5c80-0x000f5c8f]
[ 0.008271] Using GB pages for direct mapping
[ 0.008371] RAMDISK: [mem 0x3cbf6000-0x3ffcffff]
[ 0.008377] ACPI: Early table checksum verification disabled
[ 0.008386] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[ 0.008391] ACPI: RSDT 0x000000003FFE1667 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.008399] ACPI: FACP 0x000000003FFE1503 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.008403] ACPI: DSDT 0x000000003FFE0040 0014C3 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.008407] ACPI: FACS 0x000000003FFE0000 000040
[ 0.008409] ACPI: APIC 0x000000003FFE1577 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.008412] ACPI: HPET 0x000000003FFE1607 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.008415] ACPI: WAET 0x000000003FFE163F 000028 (v01 BOCHS BXPCWAET 00000001 BXPC 00000001)
[ 0.008418] ACPI: Reserving FACP table memory at [mem 0x3ffe1503-0x3ffe1576]
[ 0.008419] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe1502]
[ 0.008420] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[ 0.008421] ACPI: Reserving APIC table memory at [mem 0x3ffe1577-0x3ffe1606]
[ 0.008421] ACPI: Reserving HPET table memory at [mem 0x3ffe1607-0x3ffe163e]
[ 0.008422] ACPI: Reserving WAET table memory at [mem 0x3ffe163f-0x3ffe1666]
[ 0.008663] No NUMA configuration found
[ 0.008664] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff]
[ 0.008675] NODE_DATA(0) allocated [mem 0x3cbcc000-0x3cbf5fff]
[ 0.008902] Zone ranges:
[ 0.008902] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008904] DMA32 [mem 0x0000000001000000-0x000000003ffdafff]
[ 0.008905] Normal empty
[ 0.008906] Device empty
[ 0.008907] Movable zone start for each node
[ 0.008909] Early memory node ranges
[ 0.008910] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008911] node 0: [mem 0x0000000000100000-0x000000003ffdafff]
[ 0.008913] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff]
[ 0.009167] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.009189] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.009928] On node 0, zone DMA32: 37 pages in unavailable ranges
[ 0.010256] ACPI: PM-Timer IO Port: 0x608
[ 0.010274] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.010307] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.010309] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.010311] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.010311] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.010315] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.010316] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.010321] Using ACPI (MADT) for SMP configuration information
[ 0.010323] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.010326] TSC deadline timer available
[ 0.010331] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.010339] kvm-guest: KVM setup pv remote TLB flush
[ 0.010345] kvm-guest: setup PV sched yield
[ 0.010355] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.010356] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.010357] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.010358] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.010359] [mem 0x40000000-0xfeffbfff] available for PCI devices
[ 0.010360] Booting paravirtualized kernel on KVM
[ 0.010363] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.013189] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.013574] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u524288
[ 0.013606] kvm-guest: KVM setup async PF for cpu 0
[ 0.013609] kvm-guest: stealtime: cpu 0, msr 3b81c500
[ 0.013611] kvm-guest: PV spinlocks enabled
[ 0.013614] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.013621] Built 1 zonelists, mobility grouping on. Total pages: 257892
[ 0.013622] Policy zone: DMA32
[ 0.013623] Kernel command line: root=/dev/vda1 debconf_priority=critical console=ttyS0,115200n1 DEBIAN_FRONTEND=text
[ 0.013717] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.013750] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.013805] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.015650] Memory: 226540K/1048036K available (12295K kernel code, 2545K rwdata, 7564K rodata, 2408K init, 3684K bss, 107136K reserved, 0K cma-reserved)
[ 0.015663] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[ 0.015760] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.015772] Kernel/User page tables isolation: enabled
[ 0.015786] ftrace: allocating 36444 entries in 143 pages
[ 0.025918] ftrace: allocated 143 pages with 5 groups
[ 0.026187] rcu: Hierarchical RCU implementation.
[ 0.026189] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.026190] Rude variant of Tasks RCU enabled.
[ 0.026191] Tracing variant of Tasks RCU enabled.
[ 0.026192] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.026193] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.028616] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.028841] random: crng done (trusting CPU's manufacturer)
[ 0.037628] Console: colour VGA+ 80x25
[ 0.118098] printk: console [ttyS0] enabled
[ 0.118628] ACPI: Core revision 20200925
[ 0.119230] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.120392] APIC: Switch to symmetric I/O mode setup
[ 0.121186] x2apic enabled
[ 0.121742] Switched APIC routing to physical x2apic.
[ 0.122318] kvm-guest: setup PV IPIs
[ 0.123663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.124352] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x284460f1a18, max_idle_ns: 440795261562 ns
[ 0.125608] Calibrating delay loop (skipped) preset value.. 5587.06 BogoMIPS (lpj=11174120)
[ 0.126598] pid_max: default: 32768 minimum: 301
[ 0.127167] LSM: Security Framework initializing
[ 0.127718] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.129634] AppArmor: AppArmor initialized
[ 0.130113] TOMOYO Linux initialized
[ 0.130546] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.131380] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.132533] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.133348] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.133609] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.134298] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.135276] Spectre V2 : Mitigation: Full generic retpoline
[ 0.135920] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.136870] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.137608] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.138579] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.139686] SRBDS: Unknown: Dependent on hypervisor status
[ 0.140332] MDS: Mitigation: Clear CPU buffers
[ 0.140944] Freeing SMP alternatives memory: 32K
[ 0.142916] smpboot: CPU0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.144427] Performance Events: Haswell events, full-width counters, Intel PMU driver.
[ 0.145399] ... version: 2
[ 0.145605] ... bit width: 48
[ 0.145605] ... generic registers: 8
[ 0.145605] ... value mask: 0000ffffffffffff
[ 0.145609] ... max period: 00007fffffffffff
[ 0.146231] ... fixed-purpose events: 3
[ 0.146734] ... event mask: 00000007000000ff
[ 0.147489] rcu: Hierarchical SRCU implementation.
[ 0.148385] smp: Bringing up secondary CPUs ...
[ 0.149002] x86: Booting SMP configuration:
[ 0.149499] .... node #0, CPUs: #1
[ 0.092834] kvm-clock: cpu 1, msr f8b7041, secondary cpu clock
[ 0.092834] smpboot: CPU 1 Converting physical 0 to logical die 1
[ 0.153623] kvm-guest: KVM setup async PF for cpu 1
[ 0.154208] kvm-guest: stealtime: cpu 1, msr 3b89c500
[ 0.154809] #2
[ 0.092834] kvm-clock: cpu 2, msr f8b7081, secondary cpu clock
[ 0.092834] smpboot: CPU 2 Converting physical 0 to logical die 2
[ 0.157631] kvm-guest: KVM setup async PF for cpu 2
[ 0.158227] kvm-guest: stealtime: cpu 2, msr 3b91c500
[ 0.158843] #3
[ 0.092834] kvm-clock: cpu 3, msr f8b70c1, secondary cpu clock
[ 0.092834] smpboot: CPU 3 Converting physical 0 to logical die 3
[ 0.161629] kvm-guest: KVM setup async PF for cpu 3
[ 0.162225] kvm-guest: stealtime: cpu 3, msr 3b99c500
[ 0.162833] smp: Brought up 1 node, 4 CPUs
[ 0.162833] smpboot: Max logical packages: 4
[ 0.162833] smpboot: Total of 4 processors activated (22348.24 BogoMIPS)
[ 0.175334] node 0 deferred pages initialised in 4ms
[ 0.181478] devtmpfs: initialized
[ 0.181643] x86/mm: Memory block size: 128MB
[ 0.182295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.182865] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.183766] pinctrl core: initialized pinctrl subsystem
[ 0.186725] NET: Registered protocol family 16
[ 0.187323] audit: initializing netlink subsys (disabled)
[ 0.187979] audit: type=2000 audit(1641568386.327:1): state=initialized audit_enabled=0 res=1
[ 0.187979] thermal_sys: Registered thermal governor 'fair_share'
[ 0.189610] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.190313] thermal_sys: Registered thermal governor 'step_wise'
[ 0.190977] thermal_sys: Registered thermal governor 'user_space'
[ 0.191642] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.192378] cpuidle: using governor ladder
[ 0.193617] cpuidle: using governor menu
[ 0.194193] ACPI: bus type PCI registered
[ 0.194663] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.195531] PCI: Using configuration type 1 for base access
[ 0.196210] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.197646] Kprobes globally optimized
[ 0.198127] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.198443] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.302217] ACPI: Added _OSI(Module Device)
[ 0.305616] ACPI: Added _OSI(Processor Device)
[ 0.306204] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.306761] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.307398] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.307920] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.308579] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.309631] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.311233] ACPI: Interpreter enabled
[ 0.311690] ACPI: (supports S0 S3 S4 S5)
[ 0.312166] ACPI: Using IOAPIC for interrupt routing
[ 0.312800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.313696] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.315932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.316691] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.317616] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.319167] acpiphp: Slot [3] registered
[ 0.319657] acpiphp: Slot [4] registered
[ 0.320144] acpiphp: Slot [5] registered
[ 0.320627] acpiphp: Slot [6] registered
[ 0.321112] acpiphp: Slot [7] registered
[ 0.321596] acpiphp: Slot [8] registered
[ 0.321622] acpiphp: Slot [9] registered
[ 0.322123] acpiphp: Slot [10] registered
[ 0.322632] acpiphp: Slot [11] registered
[ 0.323136] acpiphp: Slot [12] registered
[ 0.323649] acpiphp: Slot [13] registered
[ 0.324155] acpiphp: Slot [14] registered
[ 0.324646] acpiphp: Slot [15] registered
[ 0.325108] acpiphp: Slot [16] registered
[ 0.325571] acpiphp: Slot [17] registered
[ 0.325623] acpiphp: Slot [18] registered
[ 0.326086] acpiphp: Slot [19] registered
[ 0.326553] acpiphp: Slot [20] registered
[ 0.327028] acpiphp: Slot [21] registered
[ 0.327526] acpiphp: Slot [22] registered
[ 0.328021] acpiphp: Slot [23] registered
[ 0.328513] acpiphp: Slot [24] registered
[ 0.329010] acpiphp: Slot [25] registered
[ 0.329487] acpiphp: Slot [26] registered
[ 0.329625] acpiphp: Slot [27] registered
[ 0.330089] acpiphp: Slot [28] registered
[ 0.330552] acpiphp: Slot [29] registered
[ 0.331053] acpiphp: Slot [30] registered
[ 0.331548] acpiphp: Slot [31] registered
[ 0.332039] PCI host bridge to bus 0000:00
[ 0.332532] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.333339] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.333609] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.334500] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[ 0.335381] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.336276] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.336964] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.338007] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.339230] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.341611] pci 0000:00:01.1: reg 0x20: [io 0xc0e0-0xc0ef]
[ 0.343087] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.343962] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.344752] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.345602] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.345784] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[ 0.348742] pci 0000:00:01.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.350158] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.351262] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.352125] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.353169] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.354578] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.356733] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.360330] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.361569] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00
[ 0.362144] pci 0000:00:03.0: reg 0x10: [io 0xc0a0-0xc0bf]
[ 0.365326] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.366922] pci 0000:00:04.0: [1af4:1000] type 00 class 0x020000
[ 0.369566] pci 0000:00:04.0: reg 0x10: [io 0xc0c0-0xc0df]
[ 0.370242] pci 0000:00:04.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.373019] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.374306] pci 0000:00:04.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.375717] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.377232] pci 0000:00:05.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.378560] pci 0000:00:05.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.381399] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.383235] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.384022] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.384813] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.385574] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.385672] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.386730] iommu: Default domain type: Translated
[ 0.387364] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.387364] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.387397] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.389616] vgaarb: loaded
[ 0.390042] EDAC MC: Ver: 3.0.0
[ 0.390583] NetLabel: Initializing
[ 0.390583] NetLabel: domain hash size = 128
[ 0.390741] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.391446] NetLabel: unlabeled traffic allowed by default
[ 0.392123] PCI: Using ACPI for IRQ routing
[ 0.393801] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.394409] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.397668] clocksource: Switched to clocksource kvm-clock
[ 0.406519] VFS: Disk quotas dquot_6.6.0
[ 0.407051] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.407976] AppArmor: AppArmor Filesystem Enabled
[ 0.408560] pnp: PnP ACPI init
[ 0.409224] pnp: PnP ACPI: found 6 devices
[ 0.415450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.416556] NET: Registered protocol family 2
[ 0.417131] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.418283] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.419327] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.420290] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.421163] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.422269] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.423063] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.424081] NET: Registered protocol family 1
[ 0.424631] NET: Registered protocol family 44
[ 0.425186] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.425974] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.426711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.427532] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]
[ 0.428358] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.429219] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.429929] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.430644] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.447794] PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.464834] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x700 took 32647 usecs
[ 0.465790] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.466814] PCI: CLS 0 bytes, default 64
[ 0.467336] Trying to unpack rootfs image as initramfs...
[ 0.830104] Freeing initrd memory: 53096K
[ 0.830673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284460f1a18, max_idle_ns: 440795261562 ns
[ 0.832170] Initialise system trusted keyrings
[ 0.832738] Key type blacklist registered
[ 0.833335] workingset: timestamp_bits=36 max_order=18 bucket_order=0
[ 0.834875] zbud: loaded
[ 0.835356] integrity: Platform Keyring initialized
[ 0.835941] Key type asymmetric registered
[ 0.836436] Asymmetric key parser 'x509' registered
[ 0.837020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.837996] io scheduler mq-deadline registered
[ 0.838682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.839772] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.840746] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.841993] Linux agpgart interface v0.103
[ 0.842509] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.843728] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.845247] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.845830] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.846517] mousedev: PS/2 mouse device common for all mice
[ 0.847223] rtc_cmos 00:05: RTC can wake from S4
[ 0.848167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.849239] rtc_cmos 00:05: registered as rtc0
[ 0.849980] rtc_cmos 00:05: setting system clock to 2022-01-07T15:13:06 UTC (1641568386)
[ 0.850915] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.851750] intel_pstate: CPU model not supported
[ 0.852402] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.853235] NET: Registered protocol family 10
[ 0.857669] Segment Routing with IPv6
[ 0.858257] mip6: Mobile IPv6
[ 0.858666] NET: Registered protocol family 17
[ 0.859294] mpls_gso: MPLS GSO support
[ 0.859991] IPI shorthand broadcast: enabled
[ 0.860516] sched_clock: Marking stable (771125878, 88834612)->(929722838, -69762348)
[ (1*installer) 2 shell 3 shell 4- log ][ Jan 07 15:23 ]
Loading additional components ... 25%... 50%... 75%... 100%
Starting up the partitioner ... 4%... 13%... 22%... 31%... 40%... 50%... 63%... 72%... 81%... 90%... 100%
Guided partitioning ... 20%... 40%... 60%... 80%
Partitions formatting ... 33%
Partitions formatting
Installing the base system ... 0%
... 17%... 20%... 30%... 40%... 50%... 60%... 70%
... 79%... 83%... 91%... 100%
Configuring apt ... 7%... 14%... 14%... 21%... 35%... 40%... 50%... 64%... 71%... 85%... 92%... 100%
Select and install software ... 1%
... 10%... 13%... 20%... 30%... 40%... 50%... 61%... 71%... 81%... 78%... 80%... 90%
Select and install software
---------------------------
!! ERROR: Installation step failed
An installation step failed. You can try to run the failing item again from the
menu, or skip it and choose something else. The failing step is: Select and
install software
[Press enter to continue]
=========================
After this...
=========================
hoose the next step in the install process:
1: Choose language,
2: Access software for a blind person using a braille display,
3: Configure the keyboard,
4: Detect network hardware,
5: Configure the network,
6: Choose a mirror of the Debian archive,
7: Download installer components,
8: Set up users and passwords,
9: Configure the clock,
10: Detect disks,
11: Partition disks,
12: Install the base system,
13: Configure the package manager,
14: Select and install software [*],
15: Install the GRUB boot loader,
16: Continue without boot loader,
17: Finish the installation,
18: Change debconf priority,
19: Save debug logs,
20: Execute a shell,
21: Abort the installation,
Prompt: '?' for help, default=14>
=============================
Ich choose the default........
=============================
Select and install software ... 1%... 10%
Select and install software
---------------------------
Applying updates on a frequent basis is an important part of keeping the system
secure.
By default, security updates are not automatically installed, as security
advisories should be reviewed before manual installation of the updates using
standard package management tools.
Alternatively the unattended-upgrades package can be installed, which will
install security updates automatically. Note however that automatic
installation of updates may occasionally cause unexpected downtime of services
provided by this machine in the rare cases where the update is not fully
backward-compatible, or where the security advisory requires the administrator
to perform some other manual operation.
Updates management on this system:
1: No automatic updates [*], 2: Install security updates automatically,
Prompt: '?' for help, default=1>
==============================
Again, I chose the default
==============================
... 13%... 16%... 16%... 20%... 30%... 40%... 50%... 60%... 70%... 80%... 90%
!! ERROR: Installation step failed
An installation step failed. You can try to run the failing item again from the
menu, or skip it and choose something else. The failing step is: Select and
install software
[Press enter to continue]
=========================
This is never ending. A couple of days ago, I did not have any problems with it. Then, I tried to create a new initvm, because I added an XML Tag to an elbe schema, and the trouble started.
I redid every change, but still, I am not able to create an initvm. Not even with the installed version of elbe (13.3)
Has anyone any hint or idea?
i. A. Martin Steih
Projektleiter
Entwicklung
Lachmann & Rink GmbH
Martin.Steih at lachmann-rink.de<mailto:Martin.Steih at lachmann-rink.de> | www.lachmann-rink.de<https://www.lachmann-rink.de>
fon: +49 2734 2817 430<tel:+49%202734%202817%20430>
Hommeswiese 129, 57258 Freudenberg | Otto-Hahn-Straße 18-20, 44227 Dortmund
Geschäftsführer: Dipl.-Ing. Arjan Bijlard, Dipl.-Inf. Claudius Rink | Amtsgericht Siegen, HRB 2600
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linutronix.de/pipermail/elbe-devel/attachments/20220107/888d7067/attachment-0001.htm>
More information about the elbe-devel
mailing list