[elbe-users] [newbie] Including Custom Device tree & custom uboot

[Jerome MOLIERE]

Hi Ralf and all elbe users

Thanks for being so supportive...

We will try that and we 'll let you know....

The last point is to check the  board datasheet I guess, to confirm
where to put the bootloader ...I imagine that this is not a standard
location....


Thanks again

Regards

On 2/4/19 10:52 AM, Ralf Schlatterbeck wrote:
> On Mon, Feb 04, 2019 at 10:45:17AM +0100, Ralf Schlatterbeck wrote:
>> What you need to do for your chipset for a successful boot may differ a
>> lot (e.g. if you don't have an SD image but need to use a NAND flash or
>> similar).
> Just to document what I'm doing here, your procedure will probably
> differ.
> Elbe allows to put a binary image onto the bootloader part of an
> SD-image using the binary stanza in xml, I have:
>
>     <images>
>       <msdoshd>
>         <name>sdcard.img</name>
>         <size>1900MiB</size>
> 	  <binary offset="8" blocksize="1024">u-boot.bin</binary>
>
> Which basically says "put the file u-boot.bin at the start-position
>  1024 * 8 = 8192 = 0x2000 on the SD-card image.
>
> Ralf

-- 
Jérôme MOLIERE - architect & CEO UCare
GSm:(+33)623492829